Lippert-components Electric Slideout System Manuel d'utilisateur télécharger pdf (Page 14)

SYNCHRONIZING ROOM TRAVEL

The Lippert Electric Slideout System room travel (both sides of the room

traveling the same distance) can be adjusted with specially designed

synchronizing bracket mounted on the passive slide tube. The passive

slide tube is the one that is not powered. The active slide tube is the one

that has the cylinder attached. If one side of the room fails to seal adjust

as follows:

1. Loosen bolts (Fig. 9 A) on top of the passive slide

tube (Fig. 9B)

2. Push or pull room (on the passive side) to align with the

active side.

Fig.9

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Lippert-components Electric Slideout System Manuel d'utilisateur Page 14